What should I do if the faucet leaks? What are the reasons for a leaking faucet?

What should I do if the faucet leaks? What are the reasons for a leaking faucet? In our daily life, we always encounter some small problems, such as leaking water taps. I believe many people have encountered them in their daily lives. Today, I will take you to understand how to deal with the leaking taps. Interested friends one Get up and take a look. 1. What should I do if the faucet leaks? 1. When the valve core is closed, the faucet still leaks water, which is the reason for the deformation of the rubber ring at the bottom of the valve core. Everyone must understand clearly. For the former, it is recommended to remove the handle and decorative cover and re-tighten the pressure cap. For the latter, it is recommended to take out the valve core, check the condition of the rubber ring, and reinstall it. 2. For example, sometimes water seeps from around the valve core, so be patient when handling it. If you encounter this phenomenon, it may be that the spool is loose or offset. It is recommended to take out the spool and install it again. 3. If the bottom of our faucet leaks, the O-ring is not installed or deformed and the handling is easier. It is recommended to unscrew the hose to see if the O-ring is loose, and reinstall it if it is loose. If it is found that the O-ring has been deformed, it is recommended to replace the O-ring. 2. What are the reasons for faucet leakage? 1. Water faucet bubbler leaks Water leakage around the faucet bubbler is mainly because the gasket of the faucet bubbler is worn or aging. Generally, there are washers in faucets, and the quality of washers in different brands is also very different. However, if this happens, just replace the washers. Then remove the old washer and replace it with a new one. Pay attention to choosing a washer of the same size. The washers of some faucets are fixed with nuts and screws. Pay attention to observation before replacing them. Remove them after loosening them. You cannot pull them out with brute force. 2. The faucet is not closed tightly. If the faucet is still leaking after replacing the gasket, it is likely that there is a problem with the ceramic sheet under the gasket. Then it is necessary to replace the corresponding ceramic valve core. If most of the Moen faucets in your home are constant core spools, their transmission rods are made of stainless steel; the whole is glued and sealed, which can adapt to various environments to ensure that the faucet will not leak water in a poor environment. Can be durable for a long time. 3. Water leakage in other places. If you feel that there is always a gap in the faucet, the reason may be that the O-ring is damaged. The O-ring is at the position where the base and the faucet interface. If it is damaged, replace the O-ring with the above steps. In addition, the leaking of the faucet may also be caused by the damage of the water-stop tape on the faucet. At this time, the water-stop tape needs to be replaced. After the faucet is removed, use the wind-print tape to roll the threaded part 5-6 times clockwise to solve the problem. problem. (