What should I pay attention to when buying a toilet?

What should I pay attention to when buying a toilet? Many people have to go through the bathroom decoration, but most people don’t know much about it. So today we will share with you some of the time to choose a toilet. Main matters. The first important thing is the water part, which directly determines the service life of the toilet; the second important thing is quality assurance, and you must not neglect any large-scale after-sales service; the third important thing is flushing, which can be judged according to the structure of the toilet pit; The fourth important is the structure, including: the size of the barrel distance, whether it is a split or a conjoined body, whether it is a rear drain or a lower drain; the fifth important, the price, should be counted according to one's economic strength; the sixth important, the appearance, when possible , Of course, you have to buy one you like. First, there is a big difference in the quality of water fittings between branded toilets and ordinary toilets. In the houses renovated in the early to mid-1990s, almost every family has experienced the pain of water tank strikes. Therefore, do not ignore the water fittings when choosing a toilet. This link, how to identify the specific, it is best to read more by yourself, and then listen to the opinions of the shopping guide. Second, once there is a quality problem, you must find a manufacturer who can return or repair it, otherwise you will only be affected. Third, as the focus of this section, it is recommended that you should at least master the toilet flushing methods before buying a toilet. From a practical point of view, the toilet should first have the basic function of flushing thoroughly. Therefore, the flushing method is very important. The toilet flushing is straight flush, rotating siphon, whirlpool siphon, and jet siphon. I recommend the jet siphon type to everyone because of its low noise, strong decontamination power, and better vision in the pit. This has basically been universally recognized by everyone. Fourth, about drainage: except for very few rear drains, the toilets generally use lower drainage; about the barrel distance: the toilet distance is mainly 300mm, 400mm, and some students actually measured the barrel distance to be greater than 400. I don’t know how to do it. Okay, everyone, don’t forget, the walls should be tiled; I personally suggest to choose a one-piece toilet. Fifth, in terms of appearance, it is best to choose the smooth line. There are many toilet bases on the market that look like a winding intestine from the side, which does not feel very good, because going to the toilet is a process of fully exerting the function of the intestine, and there is no need to show it on the toilet. Finally, there are a few suggestions: 1. You should choose a toilet with a moderate water storage capacity. If the water storage capacity is too high, it will splash your butt, and if the water storage capacity is too low, it will easily run off. 2. Pay attention to the glazed surface of the toilet. The glazed surface of a good-quality toilet should be smooth and smooth without blistering and saturated in color. After inspecting the outer surface of the glaze, you should also touch the toilet drain, if it is rough, it will easily cause hanging in the future. 3. After the toilet is installed, try the flushing effect as soon as possible. The best way is to find a cigarette butt and throw it in. It can flush down at once, and the sound is not loud, indicating that the installation process is okay. The above is to share with you the content about toilet selection. The choice of toilet is very important. For more sanitary ware related information, please come to Rifeng Sanitary Ware for consultation. (