What to do if water leaks after the shower is turned off

What should I do if the shower leaks water after the shower is turned off? Clidi Sanitary Ware tells you some tips, have you encountered any problems like this? After the shower was turned off, the water still ticked out. Sometimes after turning it off for a long time, water comes out suddenly, but every time it stops flowing. This is how it happened? Today, let’s take a look at 'The water suddenly flows after the shower is turned off. Is it a quality problem?' Regarding this issue, the bathroom girl always suspected the shower quality problem at first. In order to clarify this problem, the bathroom girl also specially I bought a brand-name shower, but this kind of situation still occurs. Later, I asked a professional to figure out that the water running after the shower was turned off was because of the water stored in the top spray and the shower pipe. Professional introduction: In order to pursue the comfort of bathing, the current shower head sprays are quite large. The larger the shower head means, the more water there is after turning off the faucet. After use, the air pressure inside the shower is in equilibrium with the atmospheric pressure, so the water inside will not flow out temporarily. After a period of time, the water will flow out after losing the balance. This is a problem with large-top showers. It is not that the shower is leaking or broken, so you can rest assured if you encounter this problem. If it is continuous dripping and leaking, it is the quality problem. So what should I do if the shower really leaks? First, analyze the factors of the shower water leakage. The main points are as follows: 1. The shower takes a long time to block the shower nozzle, and the water output will become smaller. This is because the water quality is not good, the water contains a lot of alkali, and the scale deposits in the water outlet. At this time, it will be solved by the after-sales service of the shower. Therefore, choosing a reliable business is very important. 2. Shower head coating Many people have found that the shower head will peel off the paint, and it is hard to see after the paint is peeled off. If you have just bought a shower that has this problem, it will affect the appearance. Moreover, some poor-quality showers will block because of paint falling off. So we have to take a closer look at the surface of the purchased shower head for these problems. When purchasing a shower, you must carefully observe whether the surface of the shower is smooth or not. If it is rough to the touch, it may be a secondary process. 3. The problem of shower material. Some showers are made of plastic or cast iron. The plastic shower head may have added a lot of waste material, and the service life will not be very long. Of course, some hand showers use organic glass ABS and other materials is still very good. However, it is not recommended that you choose the shower head made of cast iron, which is easy to rust. Many people who chose this kind of shower have regretted it, because it rusted after a short while, it was ugly to say that it also blocked the water outlet and broke the entire shower. At present, the better material is the shower head made of pure copper. After knowing the reason, we can come to a solution. There are mainly the following methods for the leakage of the shower head: 1. For the leakage of the steering ball of the shower head, first unscrew the shower head from the steering ball ring, find out the O-ring or similar seal inside, and fix it. Replace it, and then turn the shower head back to its original position. 2. Leakage occurs at the joint of the shower head handle. Select the appropriate shower hose and faucet according to the specifications, replace its rubber ring, and reinstall it. 3. Water leakage caused by grit or sediments, unscrew the shower head to clean up. If necessary, soak the parts with vinegar and scrub the parts. Take care to avoid scratching them. If the shower head is an adjustable spray type, carefully check all movable parts for signs of excessive wear. If the rotating handle cannot move smoothly or the internal cam is broken, the entire shower head needs to be replaced. 4. It takes a long time for the fine water of the shower head to become a mixed thick and fine bathing shower, and the water output will become smaller. This is because the water quality is not good, the water contains a lot of alkali, and the scale deposits on the water outlet, causing the shower to block. It is also very simple to solve. For the shower head designed with silica gel particles, just gently knead it. If the scale is serious, you can put white vinegar in a plastic bag, wrap the shower and soak for a period of time, then rinse with water. (