Aishang Sanitary Ware: Tips for Purchasing Shower Room

Aishang Sanitary Ware: Shower room purchase skills. Many people want to buy a bathtub but don't know how to start. Today, I will give you a brief introduction to the bathtub purchase skills. 1. Look at the glass ①Check whether the glass is transparent, whether there are defects such as dots, bubbles, etc. Brief analysis: The impurity of the glass material or the defects of the craftsmanship will cause the glass to have defects such as dots and bubbles, and reduce the hardness and strength of the glass. ②Check if there is 3c mark certification on the original glass. Brief analysis: 3c certification is the abbreviation of China Compulsory Product Certification. Shower room products cannot be sold without this mark. ③Look at the brief analysis of the model of fully tempered glass fragments: According to the national standard, the safe fragmentation amount of tempered glass per 50*50mm area should reach more than 40 pieces. 2. Look at aluminum ① Look at the hardness of aluminum: shower room aluminum often needs to support the weight of tens of kilograms or even hundreds of kilograms of glass. If the hardness and thickness are not good, the shower service life will be very short. The hardness of all aluminum materials And thickness are important evaluation indicators. The thickness of the qualified aluminum material in the shower room is above 1, 2mm, and the aluminum material for hanging glass on the rail must be above 1, 5mm. The hardness of aluminum can be tested by pressing the aluminum frame by hand. Aluminum with a hardness of 13 degrees or more, it is difficult for an adult to press it by hand to deform it. ②Check whether the surface of the aluminum material is smooth, whether there is chromatic aberration, trachoma, and the profile finish. Brief analysis: When the second-hand waste aluminum material is processed, the surface smoothness is not enough, there will be obvious chromatic aberration and trachoma, and the finish of the special section is dark. 3. Look at the pulley ① Look at the material of the pulley and the tightness of the wheel seat: The wheel seat of the pulley should be made of compression-resistant and heavy-duty materials, such as 304 stainless steel and high-end synthetic materials. The seal of the wheel seat is good, water vapor is not easy to enter the wheel, and the smoothness of the wheel is guaranteed. ②Look at the brief analysis of the fit between the pulley and the aluminum track: the pulley and the track should be closely matched, with small gaps, and not easy to fall off when impacted by external forces to avoid safety accidents. 4. A brief analysis of the adjustment function of the connecting wall material and wall clamp: the connecting wall material (wall clamp) is the aluminum material connecting the shower room and the wall, because the inclination of the wall and the offset of the installation will cause the glass of the connecting wall to occur Distortion, causing the glass to explode. Therefore, the connecting wall material must have the function of adjusting the vertical and horizontal directions, so that the aluminum material can match the distortion of the wall and installation, eliminate the distortion of the glass, and avoid the self-explosion of the glass. 5. Look at the brief analysis of the stability of the shower room tie rod: the shower room tie rod is an important support to ensure the stability of the frameless shower room, and the hardness and strength of the tie rod are important guarantees for the impact resistance of the shower room. It is recommended not to use a retractable tie rod, as its strength is weak. 6. Look at the brief analysis of the sealing of the shower room: the main observation parts of the sealing of the shower room are ① the connection between the shower room and the wall ② the joint between the door and the door ③ the water tightness of the hinge—the hinge is water tight because it needs to be movable It is often not good. ④The connection between the shower room and the stone base and the bottom basin. ⑤Check the sealability of the rubber strip and the rubber strip. 7. See whether the product design is humanized. . . . These humanizations can provide you with a more comfortable and intimate bathing experience. But when buying a shower room, there are many details that should be paid attention to. For example, a shower room with too high a threshold will make it more troublesome for family members to enter and exit, and there will be a risk of slipping if you are not careful. Especially for families with elderly and children, you should choose more carefully. (