Kitchen decoration skills, how to choose a kitchen sink

Kitchen decoration skills, how to choose the material of the kitchen sink Choose 304# stainless steel to make the sink tough and to avoid damage to all kinds of porcelain utensils due to impacts. The easiest way is to press the surface of the sink a little harder. If you can press it down, the material is very thin. The thickness of the material is moderate, preferably 0.8mm-1.0mm. Too thin will affect the service life and strength of the sink, and too thick to lose strength will easily damage the washed tableware. Prussian sink is a manufacturer specializing in the production of sinks. All products are made of 304 stainless steel imported from Germany, introduced German rigorous and exquisite technology and craftsmanship, incorporating 'Chinese elements' to create sink products that belong to China. Thickness: The stainless steel sink must have a certain thickness, but it is not as thick as possible. Take 304 stainless steel sink as an example, the thickness is best to choose between 0.8-1.0mm, so that the sink has toughness and can avoid all kinds of porcelain to the greatest extent The utensils are damaged due to impact, etc. The simpler way to buy is to press the surface of the sink with slight force. If you can press it down, it means that the material is too thin and the quality is poor. Frame: The frame of the sink is preferably light and thin, so that not only the sink has the largest washing space and the smallest appearance size, but also the water splashed out of the sink can be easily wiped back into the sink. Supporting parts: high-quality sinking head requires wall thickness, smooth handling, no water leakage when the cage is closed, durable and comfortable touch. The downpipe requires environmentally friendly disposable materials, easy installation, deodorization, heat resistance, aging resistance and other functions, and it is durable. Weight: A sink made of stainless steel on the right track will be heavier, while counterfeit and inferior stainless steel, such as chrome-plated steel, is lighter. Sink molding process: The one-piece molding technology solves the leakage problem caused by the welding of the basin body that the weld cannot withstand the corrosion of various chemical liquids (such as detergents, stainless steel cleaners, etc.). The one-piece forming process is a particularly important process, which has high requirements on the material of the steel plate. What kind of process is used is an obvious manifestation of the quality of the sink. Depth: Under normal circumstances, a sink with a larger cleaning volume is practical, and a depth of 200mm is better. This can effectively prevent water from splashing. At the same time, the depth is also an important indicator of the grade of the sink. A double-tank sink with a depth of more than 180mm is high Grade products. Surface flatness: Keep the line of sight consistent with the flat surface of the sink. The edge of the sink should not be protruding or warped, and the error should be less than 0.1mm. The flatness is not good, in addition to affecting the appearance, it can easily cause water seepage and fouling. The quality of the drain and the drain pipe: it directly affects the use of the sink. The better material of the drain pipe should be PP or UPVC, with high sealing degree, elasticity, heat resistance, crack resistance, long life, reasonable appearance design, and deodorization , Anti-return odor design, easy to install, no clogging, water seepage and other phenomena. The drain has steel ball positioning, squeeze seal and table-controlled dewatering. It has strong sealing, convenient and fast storage of water, can automatically filter impurities, avoid clogging the drain pipe, use high-quality rubber, and is not easy to wear. The fastening seal is fastened with self-tapping screws to ensure the seal, and the operation is safe and fast. Muffling treatment: The bottom of the sink is generally equipped with muffling pads or muffling coatings, which have the function of preventing water leakage and air leakage. Service: Although service is not a new word, judging from the current sink market, there are few companies that implement door-to-door installation for users. This point should also be considered. According to the kitchen space, single and double tanks are suitable for smaller kitchens: In modern kitchen design, the function of the sink has been significantly expanded. For example, a work area is opened up where the sink and the cabinet meet, so that the sink is connected with storage. Function. Single tank is often chosen by families with too small kitchen space, which can only meet the most basic cleaning functions; double tank design is widely used in homes, which can meet the needs of cleaning and conditioning separately, and it is also the first choice because of proper space occupation ; Because the three-tank or sub-tank is mostly special-shaped, it is more suitable for large kitchens with individual styles. It has multiple functions such as soaking or washing and storage. It can also separate the raw and cooked food, saving time and effort. If the kitchen space is small, it is more suitable to choose a single-tank or double-tank sink; if you like to wash in a large space, a large single-basin sink is a good choice. If the kitchen space is larger, the range of options is wider, and you can choose a three-tank or a sink with a drain board. (