Moen's non-contact shower room measurement solution helps new house decoration

Moen's non-contact shower room measurement program What is the most popular word to help the new house decoration during this period? Of course it is 'no contact'! Non-contact delivery and non-contact meal collection. In special times, people maintain a safe distance between people. In order to better serve users, Moen has also launched a non-contact shower measurement program in a linear shower room to assist users in the decoration of new houses! In-line shower room is easy to measure, do it yourself, only 2 steps. 1. Only need to measure the three dimensions between the bottom, middle and top of the wall: bottom: stone base middle: 1000 mm away from the stone base upper: 2000 mm away from the stone base of the shower room, the height is recommended to be 2000 mm, For double sliding doors, the recommended size is 1100-1800 mm. If the size is exceeded, it is recommended to add solid glass. 2. Inform the store shopping guide of the measured data, and the store shopping guide will fill in the measurement form according to the data you provide, and finally give you confirmation. When purchasing, make sure that the shower room door is opened. Stand outside the shower room and face the shower room to distinguish between left and right. There are several issues to be noted before the measurement: 1. After the wall and floor decoration is completed, the size measurement can be carried out. The stone foundation must be pre-buried before measurement. 2. Before measuring, make sure that the ground/stone base is level and the wall is vertical. 3. The walls of some buildings may be slightly inclined, so when measuring, the width of the upper, middle and lower positions should be measured (the difference between the upper and lower widths should not exceed 20 mm); 4. Pay attention to whether there are items such as water heaters that affect the height. Try to use a standard height of 2000 mm. 5. There is no hidden water or circuit at the wall installation profile, and no protruding wall waistline. 6. The size must be accurate to millimeters. 7. The product is customized according to the size provided by the customer, and the customized product will not be returned or exchanged once the order is placed. 8. The above scheme is only for the conventional one-shaped shower room. In case of interference, severely inclined walls and other special circumstances, you still need to contact Moen after-sales for on-site measurement. Moen flat-shaped shower room, various styles to meet different decoration needs