Sanitary ware selection tips Marco Polo Sanitary Ware summarizes the following points

Sanitary ware selection tips Marco Polo Sanitary Ware has summarized the following points. Would you choose sanitary ware? Like other household products, choosing sanitary ware also requires a lot of brains. After all, different products and different apartment types make everyone's ideas different. Xiaobian combined his own life experience, and then through consulting professionals, summed up a few key points, maybe not comprehensive, but they are all key elements, I believe I will be able to help you choose sanitary ware. [Sanitary ware] Tips for choosing sanitary wares I consulted experts and summarized the following points. First: First, you must understand the 'drain hole distance' (the picture comes from the Internet, invaded and deleted). If you want to buy something, most people's habit is to go online first. Or take a look at the store to learn about the style and price, but for the toilet, this idea is wrong. The correct step should be to first understand the 'drain hole distanceOther types of toilets. At present, the common hole distance is 30 to 40 cm, and there are also 18 to 25 cm. Therefore, the first step should be to measure in order to be aware of it. Second: Ask again about the diameter and material of the sewage pipe (the picture comes from the Internet, invaded and deleted). When choosing a specific product, whether water saving is a key element. It should be known that toilet water accounts for more than 30% of the entire household water. Sanitary ware that is not of good quality not only consumes a lot of water, but also leaks. At present, most of the sanitary wares in the market claim that they are water-saving toilets, with two flush valves for large water and small water, but professionals remind you that there is a place you can’t see, and the key to deciding whether to save water is sewage. The middle part of the pipeline is called 'blocking point' in jargon. If this place is too thick, it will not be able to form sufficient suction; if it is too thin, dirt will easily be clogged, and a few sheets of toilet paper may cause poor drainage. So what size pipe diameter should the standard 'blocking point' be? The answer given by professionals is to strictly control it between 36-38mm. In addition to the diameter of the pipe, the material is also a key factor. At present, most brand products no longer use easily deformed ceramic elbows, but non-corrosive and non-deformable PVC pipes. So when you choose, you should ask the sales staff about the pipe diameter and material of the sewage pipe. Ask the questions professionally, and the merchants dare not sloppy. Third: Touch whether the glaze is smooth and delicate with water (the picture comes from the Internet, invaded and deleted) The next thing to judge is the glaze of the sanitary ware. Most sanitary wares on the market claim to have self-cleaning glaze. The so-called 'self-cleaning glaze' is to cover the surface of the original glaze with a layer of vitreous glaze. This material has an ultra-smooth texture and good antibacterial effect. After high-temperature firing, it will finally form a smooth and clean surface of the toilet. It is difficult to attach. The most direct way to buy is to touch it. The high-quality glaze has a delicate touch and no bubbles on the surface. If the surface is rough, the color is dull, and there are even small holes under strong light, it indicates that the glaze of the toilet is not ideal. Special reminder is to pay attention to whether the sewage pipe of the sewage outlet is glazed, and touch it with your hand, because the pipes without glazed surface are easy to leak and hang up. After a long time, the toilet is prone to clogging. Fourth: Sanitary ware design is related to the quality of life of the whole family (pictures come from the Internet, invaded and deleted). As for the styles of sanitary ware, it is even more dazzling, which depends entirely on your aesthetic preferences. With regard to the main points of purchase, I have just shared so much. The last thing I want to talk about is the overall design of sanitary ware and bathroom space. Nowadays, most designs integrate the functions of bathing, toileting, and sink in one space, but don’t you find it inconvenient for this design? When your family is in the toilet, you can’t take a bath, and vice versa. If it is a small apartment, such 'contradictions' will be more intense, so partitioning areas such as bathing, washing, toileting, and changing clothes is the most scientific and humane design. In Japan, almost every family Adopting a 'zoning' design, this picture clearly identifies the functions and movement lines of each area. Is there a sense of sudden realization? Isn't our real life process just like this? So you chose a satisfactory one. After sanitary ware, there are more choices and problems waiting for you to solve. (The article comes from the Internet, invaded and deleted)