Shower room: Guide to choose your own bathroom shower room in autumn and winter

Shower room: A guide to buying your own bathroom shower room in autumn and winter. A separate shower space is what many families now hope to have. The shower room is a good choice for real separation of dry and wet. Make full use of a corner of the room, and use fences to clearly divide the shower area to form a relatively independent bathing space. Today, the shower room will share with you how to choose from the types and shapes of the shower room to the shower room suitable for your home in autumn and winter! 1. Two types of shower room (1) The framed shower room adopts 'aluminum alloy or plastic profile + tempered glass + accessoriesThe aluminum frame supports the whole frame, and the fixed glass is more stable. Therefore, we must pay attention to observe the pros and cons of the ball bearing, whether the movable door is light and convenient to open and close, and also need to carefully check the sealing performance of the waterproof rubber strip, the excellent connection between the hardware and the glass, etc. (2) Frameless shower room is a popular choice in recent years. Use hardware fittings to connect the glass, and use waterproof rubber strips for waterproofing between the glass. If the space is small, you can also choose the sliding-rail type and hinge-type sliding door shower room. 2. Four shapes of shower room Choose the shape of the shower room. There are generally four shapes on the market: square, straight, diamond cut, and arc. List their advantages and disadvantages. You can refer to: (1) The square-shaped bathroom in your home is large enough. If you like the shower room to use a large area, and it is easy to take care of, you can choose the square-shaped one, which also needs to meet the space requirement of 900*900mm. Applicable space: large bathroom. Common specifications: 800*1000㎜, 900*1000㎜, 1000*1000㎜. (2) In-line shower area in most families is located deep in the bathroom and occupies the entire wall. The in-line shower room just divides the dry and wet areas into two halves, without the need for a chassis and adding a water retaining strip, and the price is affordable. , The economic applicability is extremely high. According to the opening and closing method of the door, it is divided into push-pull and flat-open. The in-line shower room cannot be pushed or pulled vigorously to prevent damage. Applicable space: long and narrow bathroom. The glass partition is a minimalist version of the in-line shower room, which has the function of separating dry and wet to a certain extent, and the price is much cheaper. (3) Some diamond-shaped toilets have a limited area, and the square right angle may be close to the toilet, which is relatively cramped. Cut off the right angle to become a diamond shape, make full use of the corners, but also leave a passage in the outer area, which has a high area utilization rate and effectively saves space. The external passage of the shower room is also much looser, and there is room for opening the door. Applicable space: small bathroom. Common specifications: 900*900㎜, 900*1200㎜, 1000*1000㎜, 1200*1200㎜. (4) The size of the arc-shaped shower room brand is generally fixed, not suitable for non-standard products, and it needs to be equipped with a suitable chassis, with soft lines and unique models, which looks good, but it is also more expensive. In addition, the circular arc shape is also more suitable for families with elderly people, it will not be bumped and touched, and the safety is better. Common specifications: 850mm*850mm is the reasonable minimum size. In the extreme case, it should not be less than 800mm*800mm, otherwise it will affect the shower experience. (