Delima Sanitary Ware: The installation steps of the shower room need to pay attention to these when using

Delima Sanitary Ware: The installation steps of the shower room need to pay attention to these. With the improvement of the quality of life, more and more people will choose to install the shower room for dry and wet partition treatment when decorating the bathroom. As a corner of our home, the shower room not only allows us to encounter the beauty of bathing, but also allows us to enjoy the free and dripping bathing life. At this time, the installation of the shower room has become an indispensable process. Details determine success or failure, and every tiny detail will affect the consumer experience. Only after a standardized installation process can the level of installation services be improved. Shower room installation is also an art. Installation steps of the shower room Installation preparation measures the installation position and size of the shower room in advance, then choose a suitable shower room and install the foundation in advance. After determining the position of the hole for the installation of the video installation frame of the Delima linkage door, use an electric drill to drill holes at the corresponding height and position on the wall, and install the expansion rubber particles. Install the screws into the wall to fix the frame of the shower room. Always pay attention to accuracy during installation. Install sliding door or swing door Delima sliding door installation video Firstly, you need to install the wheels of the upper rail of the sliding door. After the wheels are installed, place them in the corresponding position, and then debug and install the wheels of the lower rail. Then place the sliding door, and use a screwdriver to tighten the connecting piece to fix the sliding door. Fixed does not mean that it cannot be moved at all, but that it does not leave the frame. For a shower room with a hinged door, you need to install a rubber strip on the glass first, and then install the hinge. After the adjustment is completed, use the hinge to fasten the fixed glass to the wall and fasten the fixed glass to the glass door. After installing the fixed glass and door in the shower room with hinged door, you can install the hanging clamps and pull bars. After the shower room is installed, the debugging process must not be omitted. Try to check whether the shower door opens and closes smoothly and whether it closes seamlessly. If there is a gap, you need to continue debugging. Installing the handle shower door also needs to install the handle, the handle installation is relatively simple. First separate the handle, then align the hole on the glass, and fix it with screws. At this point, the installation of the shower room has been completed, and the final work is the finishing touch. Wipe the entire shower room clean with a rag, etc. In addition, keep the installation tools and remaining accessories away, and take care to protect the finished product. Only the pursuit of excellence in the installation of shower rooms can provide consumers with high-quality services and create a good experience for consumers. Precautions for the use of the shower room After installation, the use of the shower room is closely related to the service life of the shower room. The following is a brief introduction to some related methods and techniques of shower room use. Profiles and accessories must be cleaned and maintained regularly in the shower room. Avoid using solvents with high acidity and alkalinity when wiping. It is advisable to use a neutral detergent for cleaning, then rinse with water and dry with a soft cotton cloth. Routinely check whether the related accessories can be used normally and whether there is any blockage of foreign objects, etc. The parts that are aging or corroded by moisture must be replaced in time. When the glass Delima shower room leaves the factory, the glass has been affixed with diamond nano easy-to-clean explosion-proof film. When cleaning, do not use rough and sharp cleaning tools such as steel balls, glass scrapers and high acid-base solvents to wipe, so as to avoid scratches or damage. , Just wipe it with a soft dry cloth and neutral detergent. It is forbidden to place and use items with sharp corners or items that are likely to cause damage to the glass in the shower room. When opening and closing doors on rails and pulleys, be attentive and light. Avoid slamming the movable door forcefully, so as not to cause the movable door to fall off. And pay attention to regularly clean the slide rails, pulleys, and add lubricant (lubricating oil or lubricating wax) to ensure the smoothness of the slide rails. From the selection, installation to maintenance of the shower room, every step cannot be done! Insist on striving for perfection in every detail, and strive to be perfect in every detail, in order to create excellent quality. Only by adhering to the principle of meticulousness, can Delima's extraordinary work be achieved with the spirit of craftsmanship. (