Tips for shower room maintenance: Proper maintenance can be used for longer

Tips for shower room maintenance Proper maintenance can be used for longer to create a perfect separation of dry and wet. The shower room is your best choice. But if you want to extend the service life of the shower room, it is necessary to master some maintenance tips for the shower room. Want to know more about the maintenance of shower room? Please follow the steps below to take a look. The maintenance of toughened glass in the shower room maintenance tips: do not hit or hit the glass surface with sharp objects to avoid damage; do not wipe the glass surface with corrosive liquids such as thinner water; do not wipe the glass surface with rough materials to avoid occurrence Scratches. Once there are cracks or traces of damage, you must inform the after-sales service as soon as possible, and replace and repair it. Tips for shower room maintenance 1. In order to avoid scratching the glass and affecting the visual appearance of the shower room, use a soft dry cloth for daily cleaning. Shower room maintenance tips 2. For the push-pull shower room, we must pay attention to the maintenance of the pulley. Avoid forcefully hitting the movable door from the front, and regularly clean the pulleys, sliding rails, and sliding blocks, and add lubricant on time. Tips for shower room maintenance 3. For aluminum alloy door frames, if stains appear on the surface of the aluminum material, you can use a neutral detergent to dissolve in water and wipe it. Tips for shower room maintenance 4. For the shower room floor, do not hit or hit the surface with sharp objects to avoid damage. Maintenance of hardware accessories: Push-pull shower door, currently there are two ways of sliding block and sliding wheel. When using pulleys and sliders, pay attention to avoiding forceful impact on the movable door from below, so as not to cause the movable door to fall off; pay attention to regularly clean the slide rails, pulleys, and sliders, and add lubricant (lubricating oil or lubricating wax); adjust the slider regularly Adjust the screw to ensure the effective load and good sliding of the sliding door on the sliding door. Bathtub and chassis maintenance: Do not hit or hit the acrylic surface with sharp objects to avoid damage; do not wipe the acrylic surface with corrosive liquids such as thinner to avoid damage to the surface gloss; do not wipe the acrylic surface with rough materials to avoid damage Scratches appear; when cleaning the four walls and bottom basin of the shower room, a soft dry cloth should be used. If there is slight dirt, please clean it with a soft cloth or sponge dipped in a neutral detergent. When removing stubborn dirt, please remove it with alcohol. (